Nikon D300 User Manual page 75

b4: Easy Exposure Compensation
This option controls whether the [] button is needed to set
exposure compensation (pg. 114). If [On (Auto reset)] or [On] is
selected, the 0 at the center of the exposure display will blink even
when exposure compensation is set to _+0.
............ O _ p_o__nO_ ........... Description ......
Exposure compensation is set by rotating one of the
command dials (see note below). The setting
On {Auto selected using the command dial is reset when the
RESET
reset) camera or exposure meters turn off (exposure
compensation settings selected using the [] button
are not reset).
As above, except that the exposure compensation
On value selected using the command dial is not reset
when the camera or exposure meters turn off.
Off Exposure compensation is set by pressing the []
(default) button and rotating the main command dial.
[] Change Main/Sub
The dial used to set exposure compensation when [On (Auto reset)] or
[On] is selected for Custom Setting b4 ([Easy exposure compensation])
depends on the option selected for Custom Setting f7 ([Customize
command dials]) > [Change main/sub] (pg. 307).
N/A
276