Table of Contents
Advertisement
4
Touch [EXIT] to end the adjustment.
• After adjustment,
a single
screen appears.
• When
re-attaching
the 3D Conversion
Lens or
after an impact etc., it is recommended
that you
perform
the adjustment
again.
O
(_
appears.
5
Press the recording start/stop button to
start recording.
• Start recording
after removing
the Lens front cap.
• When
the 3D Conversion
Lens is attached,
the zoom
position
is fixed, and the zoom
operation
is disabled.
• When
recording
in 3D, the image will appear
with gray frame around
it. The gray frame will
be recorded
in the video.
To ensure
that the 3D video
can be safely viewed,
pay attention
to the following
points when
recording.
• Where
possible,
record with the unit in a horizontal
state.
• Do not get too close to the subject.
(record from a distance
of at least 1.2 m (3.9
feet).)
• When
moving
the unit as you record,
move it slowly.
• Try to hold the unit as steady
as possible
when recording
while
riding in a vehicle
or
walking.
• Use of a tripod is recommended
for recording
with a stable
picture.
• The reception
range for the remote
control
might become
narrow
at the upper side of the
unit, so operate
from the lower side. (-) 54)
• [ECONOMY]
will not work while you adjust the 3D Conversion
Lens attachment
position.
• When
the 3D Conversion
Lens is attached,
the auto slow shutter
setting
is [AUTO
SLOW
SHTR
(3D)]. The default setting
of [AUTO SLOW
SHTR (3D)] is [ON]. (-_ 73)
• While 3D recording
if moving
the unit fast, the message
is more likely to appear.
• If the unit is turned
on with the lens cap attached
in the shade
etc., the screen may appear
to be blue. In such a case, remove
the lens cap to return the screen to normal.
87
VQT3K69
Advertisement
Table of Contents
