Table of Contents
Advertisement
Optical Image Stabilizer LOck
In Motion
Picture
Recording
Mode,
you can further
improve
optical
image stabilization
by touching
and holding
Optical
Image Stabilizer
Lock icon. With this function,
you
can further
reduce
the effects
of the shake that tends to occur
when using zoom.
O
Optical
Image
Stabilizer
Lock icon
1
Press
the Optical
Image
Stabilizer
button
to turn the image
stabilizer
on.
2
Touch
and
hold
E_J"
• [=_7 is displayed
while you are touching
the icon.
• Optical
Image
Stabilizer
Lock is released
when you remove your finger from the icon.
•
To set the display method of the Optical
Image Stabilizer Lock icon
: [RECORD
SETUP]
_
[O.I.S.
LOCK DISPLAY]
_
desired
setting
[OFF]:
If no operation
is performed
for approx. 5 seconds, the icon disappears.
[ON]:
Constantly
display.
• Stabilization
may not be possible
under strong
shaking
conditions.
• To record while
moving
the unit quickly,
release
Optical
Image Stabilizer
Lock.
It is possible
to focus
and record
a still picture
of a subject
that is touched.
1
Touch
_,_.
2
Touch
the subject.
• Focus area will display
to the touched
position,
and a
still picture
is recorded.
• Depending
on the recording
conditions
or recognition
of the touched
position,
it may not be
possible
to record the intended
picture.
6O
VQT3K69
Advertisement
Table of Contents
