Operation Notes - Panasonic Palmcorder PalmSight PV-L50 Operating Instructions Manual

Hide thumbs Also See for Palmcorder PalmSight PV-L50:
Table of Contents

Advertisement

!
Operation Notes
When you remove the Lens Hood, pinch the Lens Hood
and turn it counterclockwise as illustrated at right.
Then attach an optional filter or lens.
* Be careful not to touch the lens itself.
* Replace the Lens Hood after removing the accessory.
Lens Hood Area Operation Caution
With a Wide or Telephoto conversion lens (optional) attached, the four corners of the
screen may darken when zoom is set to maximum wide angle.
When attaching the lens hood, a Wide or Telephoto conversion lens (optional), etc. after
a filter (optional) has been attached, the four corners of the screen may darken when
zoom is set to maximum wide angle.
With two filters (optional) attached, the four corners of the screen may darken when zoom
is set to maximum wide angle.
Cleaning EVF (Electronic Viewfinder)
To Remove
1 @ Remove the screw with a Phillips
screwdriver.
Turn counterclockwise.
O Tum the EVF Eyepiece.
(9 Pull the EVF Eyepiece.
2
Remove any lint or dust particles
with a soft clean cloth being careful
not to scratch the glass surfaces.
MOV,
392)
3
Replace the EVF Eyepiece and the
screw.
(Y
XS UE
Ho!
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Palmcorder palmsight pv-l60

Table of Contents