Table of Contents
Advertisement
Quick Links
Model H-2412G
Instant-On
Do not store gasoline or other flammable liquids
Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read the installation, operating and mainte-
nance instructions thoroughly before installing or servicing this equipment.
The purchaser of this equipment must post in a prominent location instructions to be followed in the
event the user smells gas. This information shall be obtained by consulting the local gas supplier.
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
306916
p/n
Rev. C
ECN-13352
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
FOR YOUR SAFETY
in the vicinity of this or any other appliance.
WARNING:
IMPORTANT:
IMPORTANT: DO NOT DISCARD THIS MANUAL
PRINTED IN UNITED STATES OF AMERICA
WELLS BLOOMFIELD, LLC
telephone: 775-689-5703
fax: 775-689-5976
www.wellsbloomfield.com
OPERATION
COUNTER TOP
GAS HOTPLATE
INSTANT-ON
MANUAL
for
Model
H-2412G
Includes
INSTALLATION
USE & CARE
07
M228
10/18 cps
228
Advertisement
Table of Contents
Related Manuals for Wells INSTANT-ON H-2412G
Summary of Contents for Wells INSTANT-ON H-2412G
- Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
-
Page 2: Warranty
(775) 689-5707 or fax (775) 689-5976 if service is performed by unauthorized personnel. The prices charged by Wells Bloomfield for its products are for information and other details concerning warranty. SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS Resetting of safety thermostats, circuit breakers, over cleaning schedules, are customer responsibility. -
Page 3: Table Of Contents
TABLE OF CONTENTS WARRANTY Thank You for purchasing this Wells Bloomfield appliance. SPECIFICATIONS FEATURES & OPERATING CONTROLS Proper installation, professional operation and consistent PRECAUTIONS & GENERAL INFORMATION maintenance of this equipment AGENCY APPROVAL INFORMATION will ensure that it gives you the... -
Page 4: Features & Operating Controls
FEATURES & OPERATING CONTROLS GRATE ASSEMBLY ACTUATOR DRIP TRAY HEADS REAR BURNER FRONT BURNER REAR BURNER CONTROL KNOB PILOT BURNERS FRONT BURNER CONTROL KNOB ADJUSTABLE LEGS Fig. 1 Countertop Gas Hotplate - Features & Operating Controls BURNERS Provide cooking heat Front and rear burners are individually controllable Removable for easy cleaning BURNER CONTROL... -
Page 5: Precautions & General Information
PRECAUTIONS AND GENERAL INFORMATION WARNING: This appliance is intended for use in commercial establishments only. FIRE HAZARD This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its In the event a gas odor is agents. -
Page 6: Installation
NOTICE: For servicing, Wells Mfg. recommends 6” clearance from rear of the Manufacturer’s warranty on hotplate to wall. this hotplate is in effect only... - Page 7 INSTALLATION (continued) GAS APPLIANCE CODE COMPLIANCE DANGER: FIRE AND EXPLOSION The installation of gas piping from the outlet side of the gas meter or service regulator to the hotplate must be performed by a technician HAZARD qualified and certified or licensed to install gas-fired equipment. NEVER use an open flame to check for gas leaks.
- Page 8 INSTALLATION (continued) INSTALLING THE HOTPLATE DANGER: FIRE AND Refer to the nameplate. Verify the fuel type and pressure, which must EXPLOSION match the nameplate specifications. Connecting the hotplate to the HAZARD wrong fuel type and/or pressure will compromise the safety and/or NEVER use an open flame to performance of the appliance.
-
Page 9: Initial Adjustment
INITIAL ADJUSTMENT SET GAS PRESSURE: IMPORTANT: Pressure adjustment must Turn the gas shut-off valve OFF. be performed by a qualified A gas pressure test tap is provided on the gas supply manifold. technician only. Remove both burner control knobs and the front panel. Remove plug in gas pressure test tap and attach a manometer. -
Page 10: Operation
If the knob will not turn by hand, do building. NOT attempt to force or repair it. Contact your Authorized Wells Service Agency for repairs. Forced or improperly repaired valves IF YOU SMELL GAS: pose the risk of fire and/or explosion. - Page 11 NEVER attempt to force or repair a stuck control valve. WARNING: FIRE AND EXPLOSION HAZARD Contact your Authorized Wells DO NOT set anything on grate other than cookware to be Service Agency for repairs. heated. Forced or improperly repaired valves pose the risk Pilot flame may be extinguished if blocked.
-
Page 12: Troubleshooting
Service Agency for repairs internal component NOTE: There are no user serviceable components in the burner assemblies or in the control valves. In all cases of damage or malfunction, contact your Authorized Wells Service Agency for repairs. -
Page 13: Cleaning Instructions
CLEANING INSTRUCTIONS PREPARATION WARNING: Turn gas shut-off valve OFF before cleaning. FIRE HAZARD Allow hotplate to cool completely before cleaning. Shut off the gas supply valve FREQUENCY: Daily before cleaning. TOOLS Bristle Brush CAUTION: Clean Cloth or Sponge BURN HAZARD Mild Detergent Cleaner Formulated for Stainless Steel Allow hotplate to cool... -
Page 14: Assembly Diagram
CLEANING INSTRUCTIONS (continued) GRATE ASSEMBLY Sets in place above burners Actuator heads wrap around center bar of grate DRIP TRAY Drops in place exposing REAR BURNER tops of burners Slides over LEFT Actuator heads nozzle; hooks into slide onto ends of REAR slots on pilot actuator arms support... -
Page 15: Parts & Service
20314 For factory authorized service, or to order factory DRIP TRAY, DUAL PILOT HOTPLATE 506706 authorized replacement parts, contact your Wells authorized service agency, or call: GRATE, STAINLESS STEEL 506707 Wells Bloomfield, LLC 2 Erik Circle P. O. Box 280 Verdi, NV 89439 Service Parts Dept. - Page 16 Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SERVICE TRAINING - QUALITY SERVICE SERVICE TRAINING - QUALITY SERVICE Genuine Parts Protect - YOU - All - Ways CUSTOMER SATISFACTION CUSTOMER SATISFACTION WELLS BLOOMFIELD, LLC 2 ERIK CIRCLE, P.