Specifications - Panasonic TH-37PA20 Operating Instructions Manual

I Specifications ]
Power Source
AC 120 V, 50/60 Hz AC 120 V, 50/60 Hz
Maximum : 355 W Maximum : 425 W
Power Consumption Stand-by condition : 0.8 W Stand-by condition : 0.8 W
Drive method : AC type 37-inch, i Drive method : AC type 42-inch,
Plasma Display panel
16 : 9 aspect ratio 16 : 9 aspect ratio
32.20" (818 ram) (W) x 18.15" (461 ram) (H) x 36.22" (920 rnrn) (W) x 20.39 " (518 ram) (H) x
Screen Size
36.97" (939mm) (diagonal) 41.57" (1056 ram) (diagonal)
Dimensions
42.13 " (1070ram) × 23.46 " (596 mm) x 46.06 " (1170mm) x 29.91 " (658 mm) x
(W X H x D ) 3.90" (99 mm) 3.90" (99 mm)
Mass (Weight)
65.0 lb. (29.5 kg) Net 77.2 lb. (35.0 kg) Net
Channel Capability-181
VHF-12 : UHF-56 : Cable-125
Speaker
Woofer e 1.57" (40 mm) x 4, Tweeter ¢ 1.38" (35 mm)
Sound Audio Output t6w [8w+8w] (10%THD)
Headphone
M3 (3,5 mm) Jack x 1
Two screen display tuctions 3D Y/C FILTER
FEATURES BBE VIVA LINEAR PIP
CLOSED CAPTION V-Chip
Remote control Transmitter EUR7603ZC0
AA Battery × 2 Ferrite cores (large x 5, small x 5)
Accessories Supplied
AC Cord F type Antenna Adaptor (3C-2V x 2, 5C-2V × 2)
Pedestal Fixing band
Temperature:34 F- 104 °F(0 - 40 C)
Operating Conditions
Humidity : 20 % - 80 % (non-condensing)
Connection Terminals
RGB input D-SUB 15pin
AV INPUT 1- 3
AV PROG. OUT
TO AUDIO AMP
COMPONENT VIDEO
INPUT1-2
DIGITAL IN INPUT
i
VIDEO
(Phono Jack Type)
S-VIDEO
(Mini DIN 4-pin)
AUDIO L-R
(Phono Jack Type x 2)
VIDEO
(Phono Jack Type)
AUDIO L-R
(Phono Jack Type x 2)
AUDIO L-R
(Phono Jack Type x 2)
Y
PB / PR
AUDIO L-R
(Phono Jack Type × 2)
DVI 1.0
AUDIO L-R
(Phono Jack Type x 2)
R,G,B / 0.7 Vp-p (75 _)
HD. VD / 1.0 - 5.0 Vp-p (high impedance)
1.0 Vp-p (75 £2)
Y : 1.0 Vp-p (75 _;_), C : 0.286 Vp-p (75 £_)
0.5 Vrms
1.0 Vp-p (75 £2)
0.5 Vrms
0.5 Vrms
1.0 Vp-p (including synchronization)
+ 0.35 Vp-p
0.5 Vrms
24 pin
0.5 Vrms
Note:
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
67