Digitaltv- Set-Topbox(Dtv-Stb)Or Dvdconnection - Panasonic TH-37PA20 Operating Instructions Manual

Cable Connection
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In
order to view DTV programming, the STB must be connected to the component video inputs (Y, PB, PR ) of the television.
A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your TV.
CABLES NOT SUPPLIED
DTV INPUT TERMINALS ON BACK OF TV
DIGITALTV OUTPUT
.A,.®®®
VIDEO
y F_ Pa
AUDIOOUTPUT
®®®
AN_I SPLI/ ANT2
OUT
Note:
There are 2 sets of three video inputs, Y, Pa, and PR
.
Separated component color inputs provide luminance and color
separation. Furthermore, the L (left) and R (right) audio inputs must be used.
To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP outputs on back of
television.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
m Procedure
1. Select SPEAKERS ON located in the onscreen AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust television volume to desired level.
4. Adjust amplifier volume to match the television.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu.
6. Volume, mute, bass, treble and balance are now controlled through the television.
Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier.
External Amplifier
AUDIO INTPUT
L®--
.®--
i
w
CABLES NOT SUPPLIED
CONNECTIONS ON BACK OF TV
000
,,_rf i _ td_T2
16