Owner's Responsibilities; Before Each Use; Assembly - Craftsman 580.752120 Operator's Manual

OWNER'SRESPONSiBiLITIES
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MAINTENANCESCHEDULE
MAINTENANCETASK
PRESSURE WASHER
Chec_dcieanwater inlet screen
Check high pressure hose
Check detergent hose
Check spray gun and assembly for leaks
Purge pump of air and contaminants
Prepare pump for storage below 32°F
ENGINE
Before
Each Use
X 1
X
N
×
X
OPERATINGiNTERVALS
I Every 25 Every 50 Every 100
Hours or Hours or Hours or
Yearly Yearly Yearly
See Winter Storz_ge
100-300
Hours
SERVICEDATES
FILL IN DATESAS YOU COMPLETE
REGULARSERVICE
Check oil bvel
Clean debris
Change engine oil
Service air cleaner
Service spark plug
Service spark arrestor
Clean cooling system
Clean combustion chamber
Prepare for storage
X
X
X _
X_
X
X
X_
If unit is to remain idle for longer than 30 days,
Clean if clogged. Replace if perforated or torn.
Change oil after the first (5) operating hours and every 50 hours or yearly thereafter. Changesooner when operating under dirty or dusty conditions.
Replace more often under dirty or dusty conditions,
GENERALRECO 'iJViENDATION$
Regular maintenancewill improve the performance and
extend the iife of the pressure washer. Seeany Sears or
other quaiified service deaier for service.
The pressure washer warranty does not cover items that
have been subjected to operator abuse or negiigence. To
receivefurl vatue from the warranty, the operator must
maintain pressure washer as instructed in this manual
including proper storage as detaiied in Storage.
Some adjustments wiii need to be made periodicaliy to
properly maintain your pressure washer.
AtI service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedu/echart above.
NOTE:Oncea year you should clean or replace the spark
ptug and repiace the air filter. A new spark piug and clean air
filter assure proper fuel-air mixture and help your engine run
better and last Ion@r.
ENiiSSJ!]N CONTROL
_laintenance, replacement, or repair of the emissions
controldevices and systems may be perfarmed by any non-
road engine repair establishment or individaal. However,
to obtain "no charge" emissions controi service, the work
must be performed by a factory authorized dealer. Seethe
Emissions Warranty.
BEFOREEACHUSE
1. Checkengine oil level.
2. Cleandebris.
3. Checkwater inlet screen for damage.
4. Checkhigh pressure hose for ieaks.
5. Checkcteaning tank for damage.
6. Checkgun and nozzteextension assembly for leaks.
7. Purge pump of air and contaminants.
16