Table of Contents
Advertisement
INSERTCABLE CLIP
• Insert
plastic cable clip into hole on the
back of handle column.
Push cables
into clip.
Handle Column
Cables
CONNECT SHIFT ROD
• Insert end of shift rod farthest from bend
into hole of shift lever indicator.
• Insert hairpin clip through hole of shift
rod to secure with bend of clip on right
side.
jr.
U""--Attach this End Toshift "_
ShiftRod
Lever Indicator
Shift Rod
Hairpin Cl_p
Shift:Lever
indicator
REMOVE TILLER FROM CRATE
• Adjust handle assen_by to lowest posi-
tion, Be sure lock lever is tightened
SecUre_.
• Make sure shift lever indicator is in "N"
(neutral) position.
• T'dttiller forward by lifting handle.
Separate cardboard cover from levelin(
shield.
• Rotate tiller handle to the dght and pull
tiller out of carton.
CHECK TIRE PRESSURE
The tires on your unit were ovednflated a!
the factory for shipping purposes. Correc
and equal tire pressure is important for
best tilling performance.
• Reduce tire pressure to 20 PSI.
HANDLE HEIGHT
• Handle height may be adjusted to bett_
suit operator. (See =TO ADJUST HAN-
DLEHEIGHT"
in the Service and
Adjustmenls section of this manual),
7
Hide quick links:
Advertisement
Table of Contents
