LG 47LD650 Owner's Manual page 44

PICTURE CONTROL
'u
1
c
;D
m
C)
0
z
0
This produces richer colors
This feature represents rich color as much as conventional video signal.
This function is enabled in "Picture mode 'o Cinema / _ Cinema /
Bright Room, _ Expel" when a x,J_'CC signal is inputted through HDMI,
This function filters specific colors in the video.
You can use the RGB filter to set color saturation and hue accurately.
This is a pattern used for expert adjustment.
This function is enabled in "Picture mode -. _ Exper#" when you watch
DTV.
Adjusts the overall color of the screen by changing the white baseline.
a. Gamma : Select 19, 2.2, 2.4
b. Method :2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
]"'he adjustment range is -50 - +50.
c-1. Method :10 Point IRE (LED LCD TV, LCD TV)
- Pattern: Inner, Outer
- iRE (institute of Radio Engineers) is 1he unit to display 1he size of the video
signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green
or Blue according to each setting.
Luminance: This function displays calculated luminance value for 2.2
gamma. You can input luminance value you want at 100 IRE, I/'E I'L the
target luminance value for 2.2 gamma is displayed at every 10 steps from
10 IRE to 90 iRE,
- Red/Green/Blue: The adjustment range is -50 - +50.
c-2. Method: 20 Point IRE (Plasma TV)
- IRE (lns'ti'tute of Radio Engineers) is 'the unit to display the size of the video
signal and can be set among 5, 10, 15 - 100. You can adjust Red, Green
or Blue according to each setting.
_ Red/Green/Blue: The adjustment range is =50 _ +50.
d. Apply to aH inputs
® A tool used by the experts to make adjustments by using the test patterns,
this does not affect other colors but can be used to selectively adjust the
6 color areas (Red/Green/B_ue/Cyan/MgtiYellow).
Color difference may not be distinctive even when you make the adjust_
ments for the general video.
Adjusts Red/Green/Blue/YeltowiCyan, Magenta.
Red/GreeniBlue/YellowiCyan/Magenta Color: The adjustment range is
30 +30.
Red/Green!Blue!Yellow/Cyan/Magenta Tint: The adjustment range is _30
= +30.
This feature is disabled in RGBoPC and HDMPPC mode
138