LG 60PZ750UA Owner's Manual

LG 60PZ750UA Owner's Manual

Led lcd tv / lcd tv / plasma tv

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for LG 60PZ750UA

  • Page 2: Warning / Caution

    Do not attempt to modify this product in any point of the cable entry as practical. way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.
  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Refer all servicing to qualified service per- Read these instructions. sonnel. Servicing is required when the appa- Keep these instructions. ratus has been damaged in any way, such as power-supply cord or plug is damaged, Heed all warnings.
  • Page 4 SAFETY INSTRUCTIONS ANTENNAS WARNING - To reduce the risk of Outdoor antenna grounding fire or electrical shock, do not If an outdoor antenna is installed, follow the expose this product to rain, precautions below. An outdoor antenna sys- moisture or other liquids. Do not tem should not be located in the vicinity of touch the TV with wet hands.
  • Page 5 Viewing 3D Imaging (For 3D TV) Dot Defect When viewing 3D imaging, watch the The Plasma or LCD panel is a high technol- TV from an effective viewing angle and ogy product with resolution of two million to within the appropriate distance. If you ex- six million pixels.
  • Page 6: Contents

    SAFETY INSTRUCTIONS Also certain symptoms can occur in un- specified conditions without any previ- ON DISPOSAL ous history. If you experience any of the following symptoms, immediately stop (Only Hg lamp used LCD TV) watching the 3D imaging and consult a The fluorescent lamp used in this product con- doctor: dizziness or lightheadedness, vi- tains a small amount of mercury.
  • Page 7: Table Of Contents

    CONTENTS WARNING / CAUTION On-Screen Menus Selection ......69 ......2 Quick Menu ............71 SAFETY INSTRUCTIONS ......3 Customer Support CONTENTS ............6 - Software Update..........72 - Picture Test/Sound Test........ 73 FEATURE OF THIS TV ......9 - Product/Service Info........74 - Network Test............. 74 Simple Manual............
  • Page 8 NETCAST TIME SETTING Netcast Menu............ 123 Clock Setting YOUTUBE............124 - Auto Clock Setup ..........157 PICASA............... 126 - Manual Clock Setup ........158 Auto On/Off Time Setting ......159 PICTURE CONTROL Sleep Timer Setting ........160 Picture Size (Aspect Ratio) Control.... 128 PARENTAL CONTROL / RATINGS Picture Wizard...........
  • Page 9: Feature Of This Tv

    “night” modes will then be accessible aspect-ratio screens, and AC3 digital by the user to experience the best their audio. A subset of digital television, LG HDTV has to offer. HDTV formats include 1080p, 1080i, Sophisticated and detailed calibrations and 720p resolutions.
  • Page 10: Preparation

    PREPARATION PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please con- tact the dealer where you purchased the TV. The accessories included may differ from the images below. 1.5V 1.5V Owner’s Manual CD Manual, Remote Control, Nero MediaHome 4...
  • Page 11: Optional Extras

    OPTIONAL EXTRAS Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. This device only works with compatible LG LED LCD TV, LCD TV, or Plasma TV. (Except 42/47LE5350) (Except 42/47LE5350)
  • Page 12: Front Panel Information

    PREPARATION FRONT PANEL INFORMATION Image shown may differ from your TV. 50/6OK750, 50/60PZ540, 50/60PZ550, 50/60PZ750 Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. SPEAKER Intelligent Sensor Emitter Adjusts picture according to the (For 50/60PZ540, surrounding conditions 50/60PZ550, 50/60PZ750) It is the part equipped with the emitter exchanging signal with 3D glasses.
  • Page 13 32/42/46/52/60LD550 CHANNEL ( , ) Buttons VOLUME (+, -) Buttons ENTER Button SPEAKER ENTER MENU Button Power/Standby Indicator MENU (Can be adjusted using the Power Indicator INPUT Button in the OPTION menu. p.142 INPUT POWER Button Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions...
  • Page 14 PREPARATION Image shown may differ from your TV. 47/55LD650 CHANNEL ( , ) Buttons VOLUME (+, -) Buttons ENTER ENTER Button MENU MENU Button INPUT INPUT Button SPEAKER POWER Button Power/Standby Indicator (Can be adjusted using the Power Indicator in the OPTION menu. p.142 Remote Control Sensor Intelligent Sensor...
  • Page 15 42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 42/47/55LX6500 Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions Power/Standby Indicator (Can be adjusted using the Power Indicator in SPEAKER the OPTION menu. p.142 Emitter (For 42/47/55LX6500) It is the part equipped with the emitter exchanging signal with 3D glasses.
  • Page 16 PREPARATION Image shown may differ from your TV. 47/55LE8500 Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions SPEAKER Touch Button You can operate the button just by touching the button lightly with your finger. ENTER MENU INPUT Power/Standby Indicator (Can be adjusted using the...
  • Page 17: Back Panel Information

    BACK PANEL INFORMATION Image shown may differ from your TV. 50/60PK750, 50/60PZ550, 50/60PZ750 50/60PK750 50/60PZ550 50/60PZ750 SERVICE ONLY OPTICAL AUDIO IN DIGITAL (RGB/DVI) AUDIO OUT RS-232C IN RGB IN (PC) (CONTROL & SERVICE) WIRELESS CONTROL VIDEO L(MONO) AUDIO AV IN 2 ANTENNA /CABLE /DVI IN...
  • Page 18 PREPARATION 42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500, 42/47/55LX6500 42/47LE5350 RS-232C IN RGB IN (PC) (CONTROL&SERVICE) /DVI IN (RGB/DVI) OPTICAL DIGITAL VIDEO L(MONO) AUDIO AUDIO IN AUDIO OUT ANTENNA/ CABLE IN AUDIO VIDEO CAUTION For HDMI IN 4 and USB IN 1, 2 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, For an optimal connection, 47/55LE8500...
  • Page 19 50/60PZ540 ANTENNA/CABLE IN Network connection for Netflix, Yahoo! TV Connect over-the-air or cable signals to this Widgets, etc (for USA). jack. Also used for video, photo and music files on COMPONENT IN a local network. Analog Connection. HDMI/DVI IN, HDMI IN Supports HD.
  • Page 20: Stand Instructions

    PREPARATION STAND INSTRUCTIONS (For 50/60PK750, 50/60PZ540, 50/60PZ550, 50/60PZ750) Image shown may differ from your TV. INSTALLATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the STAND BODY with the STAND BASE of the TV.
  • Page 21 DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Remove the screws that hold the stand on. M4 x 30 M4 x 28 (60PK750) (50PK750, 60PZ540, 60PZ550, 50/60PZ750) M4 x 26 (50PZ540/550) Detach the stand from TV.
  • Page 22 PREPARATION STAND INSTRUCTIONS (For 32/42/46/52/60LD550, 47/55LD650) Image shown may differ from your TV. INSTALLATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the STAND BODY STAND BODY with the STAND BASE of the TV.
  • Page 23 DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Remove the screws that hold the stand on. Detach the stand from TV. PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand.
  • Page 24 PREPARATION STAND INSTRUCTIONS (For 42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500, 42/47/55LX6500) Image shown may differ from your TV. INSTALLATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the STAND BODY with the STAND BASE of the TV.
  • Page 25 DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Remove the screws that hold the stand on. Detach the STAND REAR COVER from TV. Detach the stand from TV.
  • Page 26: Vesa Wall Mounting

    If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
  • Page 27 Standard dimensions for wall mount kits are may damage the TV or cause the TV to a fall, shown in the table. leading to personal injury. LG is not liable for these kinds of accidents. When purchasing our wall mount kit, a detailed...
  • Page 28: Cable Management

    PREPARATION CABLE MANAGEMENT Image shown may differ from your TV. Plasma TV After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the cables. In case of the LAN cable, install as shown to reduce the electromagnetic wave. CABLE HOLDER CABLE HOLDER...
  • Page 29 Image shown may differ from your TV. 32/42/46/52/60LD550, 47/55LD650 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. AC IN Open the CABLE MANAGEMENT CLIP as shown. AC IN CABLE MANAGEMENT CLIP Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
  • Page 30 PREPARATION Image shown may differ from your TV. 42/47LE5350, 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500, 42/47/55LX6500 Secure the power cord with the CABLE HOLDER on the TV back cover. It will help prevent the power cable from being removed by accident. CABLE HOLDER After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the cables.
  • Page 31: Desktop Pedestal Installation

    DESKTOP PEDESTAL INSTALLATION Image shown may differ from your TV. For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall. 10.1 cm (4 inch) 10.1 cm (4 inch) 10.1 cm (4 inch) 10.1 cm (4 inch) CAUTION Ensure adequate ventilation by following the clearance recommendations.
  • Page 32: Attaching The Tv To A Desk

    PREPARATION ATTACHING THE TV TO A DESK (For 32/42LD550, 32LE5400) Image shown may differ from your TV. The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, poten- tially causing injury or damaging the product. Stand 1-Screw (provided as parts of the product)
  • Page 33: Securing The Tv To The Wall To Prevent Falling When The Tv Is Used On A Stand

    SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
  • Page 34: Antenna Or Cable Connection

    PREPARATION To prevent damage do not connect to the power outlet until all connections are made between the devices. Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
  • Page 35: External Equipment Setup

    EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. Image shown may differ from your TV. HD RECEIVER SETUP This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device.
  • Page 36 EXTERNAL EQUIPMENT SETUP For LED LCD TV...
  • Page 37 HDMI Connection RS-232 1. How to connect RGB IN (PC) (SERVICE /DVI IN (RGB/DVI) OPTICAL DIGITAL Connect the digital set-top box to HDMI/DVI IN L(MONO VIDEO 1, 2, 3, or 4 jack on the TV. AUDIO IN AUDIO OUT ꔡ WIRELESS CONTROL No separate audio connection is necessary.
  • Page 38 EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection RS-232C IN RGB IN (PC) (SERVICE ONLY) 1. How to connect /DVI IN (RGB/DVI) OPTICAL DIGITAL Connect the DVI output of the digital set-top VIDEO L(MONO) AUDIO box to the HDMI/DVI IN 1, 2, 3, or 4* jack on AUDIO IN AUDIO OUT ꔡ...
  • Page 39: Dvd Setup

    DVD SETUP Component Connection 1. How to connect Connect the video outputs ( Y, P ) of the DVD to the COMPONENT IN VIDEO 1, 2, or 3* jacks on the TV. Match the jack colors ( Y = green, P = blue, and = red ) .
  • Page 40 EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection RS-232C IN 1. How to connect RGB IN (PC) (SERVICE ONLY) /DVI IN Connect the AUDIO/VIDEO jacks between TV OPTICAL DIGITAL (RGB/DVI) VIDEO L(MONO) AUDIO and DVD. Match the jack colors (Video = yellow, AUDIO IN AUDIO OUT Audio Left = white, and Audio Right = red)
  • Page 41 HDMI Connection 1. How to connect RS-232C IN RGB IN (PC) (SERVICE ONLY) /DVI IN Connect the HDMI output of the DVD to the HDMI/DVI IN 1, 2, 3 or 4 jack on the TV. (RGB/DVI) OPTICAL DIGITAL VIDEO L(MONO) AUDIO AUDIO IN AUDIO OUT...
  • Page 42: Vcr Setup

    EXTERNAL EQUIPMENT SETUP VCR SETUP Antenna Connection 1. How to connect ANTENNA/ Connect the RF antenna out socket CABLE IN of the VCR to the ANTENNA/CABLE IN socket on the TV. ANT OUT S-VIDEO VIDEO AUDIO ANT IN OUTPUT SWITCH Connect the antenna cable to the RF antenna in socket of the VCR.
  • Page 43 Composite (RCA) Connection 1. How to connect Connect the AUDIO/VIDEO jacks between TV RS-232C IN and VCR. Match the jack colors (Video = yellow, RGB IN (PC) (SERVICE ONLY) /DVI IN Audio Left = white, and Audio Right = red) (RGB/DVI) OPTICAL DIGITAL VIDEO...
  • Page 44: Other A/V Source Setup

    EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect Camcorder Video Game Set Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. ( Video = yellow, Audio Left = white, and Audio Right = red ) VIDEO 2.
  • Page 45: Usb Connection

    USB CONNECTION 1. How to connect Connect the USB device to the USB IN 1 or 2 jack on the side of TV. 2. How to use Memory Key After connecting the USB IN jack, you use the USB function. ( p.97...
  • Page 46: Headphone Setup

    EXTERNAL EQUIPMENT SETUP HEADPHONE SETUP (FOR LED LCD TV/LCD TV) You can listen to the sound through the headphone. 1. How to connect Plug the headphone into the head- phone socket. To adjust the headphone volume, press the VOL +/- button. If you press the MUTE button, the sound from the headphone is switched off.
  • Page 47: Audio Out Connection

    AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). 1.
  • Page 48: External Equipment Wireless Connection (Optional Extras)

    LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold separately. When you connect the wireless ready dongle (included with the media box) to the TV, external devices can be connected to the LG Wireless Media Box and video and audio will be sent to the TV wirelessly. WIRELESS...
  • Page 49: Pc Setup

    PC SETUP This TV provides Plug and Play capability, meaning that PC adjusts automatically to the TV's set- tings. VGA (D-Sub 15 Pin) Connection RS-232C IN RGB IN (PC) (SERVICE ONLY) /DVI IN 1. How to connect OPTICAL DIGITAL (RGB/DVI) VIDEO L(MONO) AUDIO...
  • Page 50 EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection RS-232C I 1. How to connect RGB IN (PC) (SERVICE ONL /DVI IN (RGB/DVI) OPTICAL DIGITAL Connect the DVI output of the PC to the HDMI/ VIDEO L(MONO) DVI IN 1, 2, 3, or 4* jack on the TV. AUDIO IN AUDIO OUT ꔡ...
  • Page 51 NOTE To get the the best picture quality, adjust the PC graphics card to 1920x1080. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or bright- ness.
  • Page 52 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768. Phase Reset MENU...
  • Page 53 Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Screen Reset (Reset to original initial values) Returns Position, Size, and Phase to the default initial settings.
  • Page 54 EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually. This feature operates only in RGB-PC mode. Phase Reset Position: This function is to adjust MENU Select PICTURE.
  • Page 55: Network Setup

    NETWORK SETUP Wired Network Connection This TV can be connected to a local area network (LAN) via the LAN port. After making the physical connection, the TV needs to be set up for network communication. RS-232C IN RGB IN (PC) (SERVICE ONLY) /DVI IN (RGB/DVI)
  • Page 56 EXTERNAL EQUIPMENT SETUP Wired Network Setup If wired and wireless networks are both available, wired is the preferred method. After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For detail information, contact your internet provider or router manual. If you already set the Network Setting Appeared when wired and...
  • Page 57 Turn off all unused network equipment in your your ISP. local home network. Some devices may gen- LG is not responsible for any malfunction of erate network traffic. the TV and/or the internet connection feature In some instances, placing the access point or...
  • Page 58 EXTERNAL EQUIPMENT SETUP Wireless Network Connection (Except 42/47LE5350) The LG Wireless LAN for Broadband/DLNA Adaptor, which is sold separately, allows the TV to connect to a wireless lan network. The network configuration and connection method may vary depending on the equipment in use and the network environment.
  • Page 59 Wireless Network Setup (Except 42/47LE5350) Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. If you already set the Network Setting Appeared when wired and wireless are simultaneously connected. If your AP is locked Scan the all available AP (Access MENU Select NETWORK.
  • Page 60 EXTERNAL EQUIPMENT SETUP When a security code is already set PIN (Personal Identification Number) If you want to connect the AP (Access Point) or router with PIN, use this feature. Repeat step 1-6 on P.59. ENTER Select Connect. Connect the acccess point with PIN mode.
  • Page 61 AD-hoc Mode This is the method of communicating directly with the machine to communicate without AP. This is the same as connecting two PCs with a cross cable. Example of the PC setting that supports a wireless network 1. Find a wireless network device in your PC.
  • Page 62 EXTERNAL EQUIPMENT SETUP Network Status Wireless Connection Wired Connection Setting: Return to the network set- MENU Select NETWORK. ting menu or wireless network setting type menu. Test: Test the current network status ENTER Select Network Status. after setting the network. Close: Return to the previous menu.
  • Page 63: Watching Tv / Channel Control

    WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. The remote control may differ from the images below. POWER Turns the TV on from standby or off to standby.
  • Page 64 WATCHING TV / CHANNEL CONTROL DELETE MUTE MUTE MENU, HOME Displays the main menu or clears all MENU Q.MENU MENU Q.MENU on-screen displays and return to TV viewing. ENTER ENTER NETCAST, Select the desired NETCAST menu PREMIUM source. p.123 BACK WIDGETS EXIT Q.MENU Opens the list of Quick Menu options.
  • Page 65 Simple Remote Control (For 42/47/55LE7500, 47/55LE8500) POWER Turns the TV on from standby or off to standby. TV/INPUT Rotates through inputs. POWER TV/INPUT Also switches the TV on from standby. p.83 VOLUME UP/ Adjusts the volume. DOWN MUTE Switches the sound on or off. p.66 CHANNEL Changes the channel.
  • Page 66: Turning On The Tv

    WATCHING TV / CHANNEL CONTROL TURNING ON THE TV First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the I, INPUT, CH ( button on the TV or press , INPUT, CH ( Number (0-9)
  • Page 67: Initial Setting

    INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus.
  • Page 68 WATCHING TV / CHANNEL CONTROL Step 3. Power Indicator (For LED LCD TV) Select On or Off. ENTER This function is disable in “Step2. Mode Setting - Store Demo”. Step 4. Time Zone Select Time Zone option. Select Daylight Saving Auto option.

Table of Contents