Interface Error; Fatal Error; Option Error - Epson Expression 636 User Manual

Color image scanner

Hide thumbs Also See for Expression 636:

Table of Contents

Interface error

The interface setup is wrong, or the scanner is not properly

connected to the computer.

If this error occurs, check the interface connection. See

"Connecting the Scanner to Your Computer" in Chapter 1.

Then press the RESET button or turn the scanner off and back

on to reset it.

This indicates one of the following problems:

optional transparency unit or the optional automatic

document feeder.

Check that the transportation lock lever is set to the UNLOCK

position and check any installed options; then press the RESET

button. If the scanner still does not operate properly, try

turning the scanner off and then back on. If it still does not

operate properly, or if this error occurs repeatedly, consult

your dealer.

This indicates a problem such as a paper jam with an installed

option unit.

Check the option unit and correct the problem. See Chapter 3,

"Options."

Troubleshooting 4-3

Table of Contents