Lights And Buttons - Epson Expression 636 User Manual

Lights and Buttons

The scanner has three indicator lights and two buttons.
OPERATE
Comes on
READY light (green)
Comes on when the scanner is ready to scan images. This light
flashes during scanning. When an error occurs, this light and
the ERROR light indicate the type of error. See the next page.
ERROR light (red)
Comes on when an error occurs. Along with the READY light, it
indicates the type of error.
OPERATE button
Turns the scanner on and off.
RESET button
Resets the scanner after an error occurs. Pressing this button
during scanning stops the scanner and may cause an error in
the scanning software.
2-2
Scanner Basics
light (green)
when the scanner is turned on.
button
button