Plugging In The Scanner - Epson Expression 636 User Manual

Plugging in the Scanner

1. Connect the power cable to the power inlet on the back of
the scanner and plug the other end into a properly
grounded outlet as shown below.
2. If any of the scanner's lights come on, press the OPERATE
button to turn off the scanner.
1-4
Setting Up the Scanner
Caution:
There are several versions
scanner's voltage.
not show the correct voltage
your dealer.
Caution:
Whenever ~024 turn off the scanner, wait at least 10 seconds
before turning it back on. Rapidly turning the scanner on
and off may damage it.
this scanner designed
of
If
the label on the back
for
for
the scanner
of