Editing A Rapid Key Or Speed Dial Number; Clearing A Rapid Key Or Speed Dial Number - Sharp FO-NS2 Operation Manual

10
Enter the name of the party by pressing the letter entry keys
(max. of 20 characters). (Make sure the Rapid Key overlay is
flipped down.)
11
START/
Press
ENTER
12
Press
compression method (G3, G4, or NO COMPRESSION) for the
document that will be sent as an e-mail attachment. (Note: You
can override this setting during the transmission procedure.)
13
START/
Press
ENTER
14
Return to Step 5 to program another number, or press
repeatedly to return to the date and time display.
•
If you programmed a Rapid Key number, you can write the name of
the destination on the label above the Rapid Key.

Editing a Rapid Key or Speed Dial number

To make changes in a Rapid Key or Speed Dial number, repeat the
programming procedure. Select the Rapid Key or Speed Dial number
for which you want to make changes in Step 5, and then change the
programmed information as needed in the following steps.

Clearing a Rapid Key or Speed Dial number

To clear a Rapid Key or Speed Dial number, select CLEAR in Step 3
of the programming procedure, press
Speed Dial number as explained in Step 5, and then press
Sending an Image Using a Rapid Key or Speed Dial Number
.
or to select the file format (TIFF or PDF) and
.
DESTINATION SET
SELECT FILE FORMAT
1=TIFF-G4
2=TIFF-G3
3=TIFF-NO COMPRESSION
4=PDF-G4
5=PDF-G3
START/
, select the Rapid Key or
ENTER
STOP
START/
.
ENTER
27