Sharp FO-NS2 Operation Manual page 26

Sending an Image Using a Rapid Key or Speed Dial Number
3
If the destination is an e-mail
destination and you wish to enter a
message, or change the sender
name or e-mail address, or select
the file format for the document,
press
after pressing the Rapid Key in
Step 2.
(After 5 seconds, the document will
be scanned and transmitted using
the settings that were stored in the
Rapid Key.)
4
Press
START/
press
ENTER
•
FROM
Enter your name, press
•
FILE FORMAT
Press
and compression (G3, G4 or NO COMPRESSION), and then press
•
MESSAGE
Use the letter entry keys to enter a message (maximum of 256
characters). A line break can be entered by pressing
finished, press
5
When you have finished changing
the options, press
select START SCANNING.
6
START/
Press
ENTER
22
WITHIN 5 SECONDS
to select the option you want to change, and then
. Change the selected option as follows:
START/
ENTER
to select the desired combination of file format (TIFF or PDF)
START/
.
ENTER
or
to begin scanning and transmission.
1:START SCANNING
2:FROM
XXX
3:FILE FORMAT
XXX
4:MESSAGE
NO MESSAGE
, enter your e-mail address, and press
1:START SCANNING
2:FROM
to
XXX
3:FILE FORMAT
XXX
4:MESSAGE
NO MESSAGE
START/
.
ENTER
START/
.
ENTER
. When