Setting A Passcode For A Personal Box - Sharp FO-CC500 Operation Manual

4
Lift the handset.
START/MEMORY
5
Press
While recording, the display will show the time left to record.
6
When finished, replace the handset or press
To delete or check an outgoing message
To delete or check an outgoing message, follow Steps 1 through 3 of the
above procedure to select the message, and then press
PLAY
to check. Note that the general outgoing message cannot be deleted. If
you need to change it, simply repeat the recording procedure.
Note: If a passcode has been set for a personal box as explained below,
deleting the OGM of the personal box will also clear its passcode.

Setting a Passcode for a Personal Box

You can set a 3-digit passcode for each personal box. When this is done, the
passcode must be entered to listen to messages in a personal box at the fax
machine.
(Note: When listening to the messages in a personal box from its
corresponding cordless handset, it is not necessary to enter the passcode. )
1
FUNCTION
Press
2
Press once and
3
Press .
and speak into the handset to record the message.
once and once.
once.
Setting a Passcode for a Personal Box
STOP
.
Display:
A.M. SETTING
BOX PASSCODE
1=SET, 2=CLEAR
to delete or
DELETE
53