Sharp AR-P17 Software setupg guide Software Setup Manual page 13

USING THE MACHINE AS A NETWORK PRINTER
BEFORE INSTALLATION
If you are running Windows 2000IXP
and a warning message appears
regarding the Windows logo test or
digital signature, be sure to click
"Continue Anyway" or "Yes".
ImCautlon
I
This completes the installation of the
software.
• After installation, see "CONFIGURING THE
PRINTER DRIVER" (p.25) to check the
printer driver settings.
• To install the Printer Status Monitor or Printer
Administration Utility, see the following
pages:
Printer Status Monitor: p.12
Printer Administration Utility: p.13
I
Click the "Next" button.
Begin installation of the printer driver.
After the installation, a message
prompting you to restartyour
computer may appear. In this case,
click the "Yes" button to restartyour
computer.
III
Click the "Close" button.
When "The installation of the SHARP
software is complete" appears, click
the "OK" button.
PCL5,
flole' I1)'OU won:10
p,,",
d.lo ",'h PS,
YO"ne,d
tb" O,"IIM,I
"P,
",p"""onl,It"
Th, PPDdrIve,,,
m"
.,;lbl~d I,,," See
lh, :elupg'Jldelo,,,,lolPPD
To use the PS printer driver, the PS3
expansion kit must be installed.
When the window for entering a printer
name appears, click the "Next" button.
If you wish to change the printer name,
enter the desired name.
When the printer driver selection window
appears, select the printer driver to be
installed and click the "Next" button.
Select the checkboxes of the printer
drivers to be installed.
Select whether or not you wish the
printer to be your default printer and
click the" Next" button.
If you are installing multiple printer drivers,
select the printer that you wish to use as
your default printer.
If you do not wish to set either printer
driver as the default printer, select "No".
Mac OS 8.6 to s.x, 10.1.5, and 10.2to 10.2,8 (except 10.2.2)
Requirements of the operating system must be satisfied.
If you are using MacOS 8.6 to 9.x, make sure that LaserWriter8 has been installed and that the
"LaserWriter8" checkbox is selected (
!El )
in "Extensions Manager" in "Control Panels". If not,
install it from the system CD-ROM supplied with your Macintosh computer.
Operating system
CPU and RAM
You will need the following hardware and software in order to install the PPD file for Macintosh.
ImCaution
I
When the print server card is installed, the LAN port on the printer expansion kit cannot be
used. Be sure to connect the cable to the Network port indicated in the picture.
HARDWARE AND SOFTWARE REQUIREMENTS
CONNECTING TO A NETWORK
Install the print server card (AR-NC5J) in the machine and connect the machine to the network.
The cable and adapter that are used vary depending on the network. Be sure to use equipment that
meets the specifications of the network. Connect the LAN cable to the LAN port on the print server
card in the machine.
APPLETALK SETTINGS
After connecting the machine to the network, configure AppleTalk settings as required for your
networi<environmenl. To configure the settings, see the online manual on the "User Software"
--Cn:RDM:- -- - - - -- -- - ------ - --- ----.---------- - - ---------- -- ---------- -- --------- ------------
Select whether or not you wish to
install the display font and click the
"Next" button.
-'\'00
11"'.ln;'.ll1,.Pld"pl,ylrnlb,",,,,gtl,eop'lOo,I"PS
.""''',oohL''
If you installed the PS printer driver,
the PS display font can be installed
from the "PRINTER UTILITIES"
CD-ROM that accompanied the PS3
expansion kit. (p.23)
'D.'k~
C.ncel
30
11