G Printer Condition Settings - Sharp AR-NB2 Online Manual

4 WEB PAGE IN THE MACHINE
Configuring the printer condition settings
Printer condition settings
Factory default settings are indicated in bold.
Default Settings
Item
Copies
Default Paper Source
2-Side Print
Page Protection
ROPM
CONTENTS
Selections
1 - 999 This is used to select the number of copies.
Auto, Set the default paper tray.
Tray 1, *Selections available depend on the trays that are installed.
Tray 2*,
Tray 3*,
Tray 4*,
Bypass (Auto)
1-Sided, When "2-Sided (Book)" is selected, two-sided printing takes place so as to
2-Sided (Book), allow binding at the left side. When "2-Sided (Tablet)" is selected, two-sided
2-Sided (Tablet) printing takes place so as to allow binding at the top.
Enable, Disable This enables page protection. Page protection prevents data loss errors when
printing complex jobs.
Enable*, Disable This enables the ROPM function. When enabled, multi-page print jobs are
stored in memory before printing, and thus the computer does not need to
repeatedly send the print data when multiple copies are printed.
* This setting is only effective when the dual function board is installed.
I N D E X
Description
(part 4)
32