Hardware And Software Requirements - Sharp AR-NB2 Setup Manual

2. "Network Utilities" CD-ROM
This CD-ROM contains "Quick Setup" and "Standard Setup (NICManager)" which are used to
configure network settings, "SC-Print2000" which is used to create an LPR port, and an online manual
that explains network settings.
The online manual on the CD-ROM explains how to configure settings on a network other than a
TCP/IP network, such as a Netware, AppleTalk, or NetBEUI network.
• SC-Print2000 is only used to create an LPR port in Windows 95/98/Me. If the printer driver is
Note
installed as explained in this manual, the LPR port is created automatically and thus there is
normally no need to use SC-Print2000.
• NICManager is also contained in the "Software" CD-ROM. If the network settings are configured
as explained in this manual, NICManager in the "Software" CD-ROM is used to configure
machine settings.
• The term "Print Server Card" appears in the "Network Utilities" CD-ROM. Where "Print
Caution
Server Card" appears, please substitute "Network expansion kit".
• If you use the "Network Utilities" CD-ROM to configure network settings, be sure to check
the machine's Ethernet address (MAC address) by printing out the Printer Setting List as
explained in
utility is not relevant.)
3. "Sharpdesk LT" CD-ROM
Install Sharpdesk LT (for Windows) from this CD-ROM. Sharpdesk LT is a desktop document
management application that makes it easy to start applications and file documents and images.
For information on the "Sharpdesk LT" CD-ROM and the procedure for installing Sharpdesk LT, see
operation manual for network scanner (PDF format).

HARDWARE AND SOFTWARE REQUIREMENTS

Check the following hardware and software requirements before installing the software.
Computer type
Operating system
Other hardware requirements An environment that allows any of the above operating systems to fully operate
*1 If you are installing the Printer Administration Utility in Windows 95, a system file must be updated before the
utility can be installed. For more information, click the "Display Readme" button in the Software Selection
window of the installer.
*2 Administrator's rights are required to install the software using the installer.
USING THE MACHINE IN A WINDOWS ENVIRONMENT
"CHECKING THE IP ADDRESS". (The message that appears in the CD-ROM
IBM PC/AT or compatible computer equipped with a 10Base-T/100Base-TX LAN
board
1
Windows 95* , Windows 98, Windows Me,
Windows NT Workstation 4.0 (Service Pack 5 or later)*
Windows 2000 Professional*
Windows XP Home Edition*
2
, Windows XP Professional*
2
- 7 -
2
,
2
,