Toshiba Tecra A7-ST5112 Resource Manual page 29

13 Once the module's connector is fully inserted into the
socket, press downward on the top edge of the module to
seat the module into the latches at the sides of the socket.
These latches should "snap" into place securely with the
corresponding cutouts in the side of the module. If the
latches and cutouts do not line up correctly, repeat steps
12-13.
latch
(Sample Illustration) Pressing down on the memory module
Do not force the memory module into position. The
memory module should be completely inserted into the
socket and level when secured in place.
Front of
computer Memory slots
(Sample Illustration) Inserting the memory module into the slot
14 Replace the memory module slot cover and secure it
using the screw.
15 Re-insert the main battery. For more information on
inserting the main battery, see "Inserting a charged
battery" on page 42.
16 Turn the computer right side up.
Adding memory (optional)
latch
29