Configure The Settings Relating To Mpeg-4 Images [Jpeg/Mpeg-4] - Panasonic WV-SP302 Operating Instructions Manual

Configure the settings relating to MPEG-4 images [JPEG/MPEG-4]

Click the [JPEG/MPEG-4] tab on the "Image/Audio" page. (☞ Pages 22 and 23: How to display/operate the setup
menu)
The [JPEG/MPEG-4] tab will be displayed when "MPEG-4" is selected for "Video encoding format". (☞ Page 42)
Configure the settings relating to MPEG-4 image such as "Max bit rate (per client)*", "Image capture size", "Image
quality", etc. in this section.
Refer to page 42 and 41 for the settings relating to H.264 images and JPEG images respectively.
46
■ MPEG-4(1) · MPEG-4(2)
[MPEG-4 transmission]
Select "On" or "Off" to determine whether or not to
transmit MPEG-4 images.
On: Transmits MPEG-4 images.
Off: Does not transmit MPEG-4 images.
Default: On
Important:
• When "16:9" is selected for "Aspect ratio", MPEG-4
transmission is unavailable.
• When "H.264" is selected for "Recording format",
MPEG-4 transmission is unavailable.
Note:
• When "On" is selected for "MPEG-4 transmission"
in "MPEG-4 (1)", displaying of both MPEG-4 images
and JPEG images on the "Live" page will become
available.
• When "On" is selected for "MPEG-4 transmission"
in "MPEG-4(1)" and "MPEG-4(2)", MPEG-4 images
are viewable using other devices with each setting.
• When "On" is selected for "MPEG-4 transmission"
in "MPEG-4(1)" or "MPEG-4(2)", the transmission
interval of JPEG images may sometimes become
longer.
[Internet mode (over HTTP)]
Select "On" when transmitting MPEG-4 images via the
Internet. It is possible to transmit MPEG-4 images with-
out changing the broadband router settings configured
for JPEG image transmission.
On: MPEG-4 images and audio will be transmitted
using the HTTP port. Refer to page 79 for further
information about the HTTP port number settings.
Off: MPEG-4 images and audio will be transmitted
using the UDP port.
Default: Off