About The Log List Window - Panasonic WV-SP302 Operating Instructions Manual

About the log list window

[Number of the listed logs]
Total number of the logs of the selected log type and a
number of the log being displayed on the top of the log
list will be displayed.
Note:
• Enter the desired log number and press the [Enter]
key on the keyboard. The log of the designated
number will be displayed on the top of the log list.
[Top] button
Click this button to display the log listed at the top.
[Prev. page] button
Click this button to display the previous page of the log
list.
Note:
• When the mouse button is held down while placing
the mouse pointer on the [Prev. page] button, the
displayed log number will be decremented.
When the mouse button is released, the decrement
of the log number will stop and the log number dis-
played at the moment when the mouse button is
released will be the top of the currently displayed
page.
[Next page] button
Click this button to display the next page of the log list.
Note:
• When the mouse button is held down while placing
the mouse pointer on the [Next page] button, the
displayed log number will be incremented.
When the mouse button is released, the increment
of the log number will stop and the log number dis-
played at the moment when the mouse button is
released will be the top of the currently displayed
page.
[Last] button
Click this button to display the log listed at the bottom.
[Time & date]
Time and date when each log has been filed will be dis-
played.
Note:
• When "Off" is selected for "Time display format"
(☞ page 26), time and date of alarm occurrence will
be displayed in 24-hour format.
• The recording timing of logs are as follows.
Alarm log: Alarm occurrence time and date will be
filed as a log.
Manual log: Time and date when recording of
images onto the SD memory card started will be
filed as a log. When JPEG recording are per-
formed sequentially, logs will be filed every one
hour.
FTP trans. error log: Logs will be filed every one
hour.
[Event]
The event type will be displayed.
The event types will be displayed only when displaying
the alarm log list.
TRM: Alarm by alarm input to terminal
VMD: Alarm by VMD alarm
COM: Alarm by command alarm
[SD memory card]
Available capacity and the original capacity of the SD
memory card will be displayed.
The displayed descriptions are the same descriptions
displayed as "Remaining capacity" on the [SD memory
card] tab. (☞ Page 31)
[Delete] button
Click this button to delete the currently displayed log
list.
When using the SD memory card, images associated
with the log list will also be deleted.
Important:
• When many images are saved on the SD memory
card, it will take some time to complete the deletion.
• In the process of the deletion, only logs will be
saved, and it is impossible to save images newly.
• Do not turn off the power of the camera until the
deletion is complete.
When the power of the camera is turned off in the
process of the deletion, some images may remain
on the SD memory card.
In this case, click the [Delete] button on the same
log list window used to delete the logs.
[Download] button
Click this button to download all logs of the selected
log list as a file onto the PC.
[Close] button
Click this button to close the log list window.
17