Gigabyte MA770T-UD3P User Manual page 87

B. S/PDIF Out:
The S/PDIF Out jacks can transmit audio signals to an external decoder for decoding to get the best
audio quality.
1. Connecting a S/PDIF Out Cable
S/PDIF Coaxial Cable
Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either one) to an external decoder for
transmitting the S/PDIF digital audio signals.
2. Configuring S/PDIF Out:
On the Digital Output(Optical) screen
bit depth. Click OK to complete.
(Note) Enter the Digital Output(Optical) screen to configure further settings if you use the S/PDIF
Out connector(s) on the back panel for digital audio output or enter the Digital Output screen
if you use the internal S/PDIF Out connector (SPDIF_OUT) for digital audio output.
S/PDIF Optical Cable
, click the Default Format tab and then select the sample rate and
(Note)
- 87 - Appendix