Mb Intelligent Tweaker(M.i.t.) - Gigabyte MA770T-UD3P User Manual

2-3

MB Intelligent Tweaker(M.I.T.)

 Advanced Clock Calibratioin
CPU Clock Ratio
CPU NorthBridge Freq.
CPU Host Clock Control
x CPU Frequency (MHz)
PCIE Clock (MHz)
HT Link Frequency
Set Memory Clock
x Memory Clock
 DRAM Configuration
******** System Voltage Optimized
System Voltage Control
x CPU NB VID Control
x CPU Voltage Control
Normal CPU Vcore
x DRAM Voltage control
x DDR VTT Voltage Control
x NB Voltage Control
x SB/HT Voltage Control
x NB PCIE Voltage Control
: Move
Enter: Select
F5: Previous Values
• Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately alter
ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values
and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set
the System Voltage Control item to Auto to optimize the system voltage settings.
Advanced Clock Calibratioin
Advanced Clock Calibratioin
x Value (All Cores)
x Value (Core 0)
x Value (Core 1)
x Value (Core 2)
x Value (Core 3)
: Move
Enter: Select
F5: Previous Values
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
********
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced Clock Calibratioin
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Press Enter]
[Auto] 2800 Mhz
[Auto] 2000 Mhz
[Auto]
200
[Auto]
[Auto]
[Auto]
x5.33 1066Mhz
[Press Enter]
[Auto]
Auto
Auto
1.2500V
Auto
Auto
Auto
Auto
Auto
F10: Save
[Disabled]
-2%
-2%
-2%
-2%
-2%
F10: Save
- 37 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup