Dram Configuration - Gigabyte MA770T-UD3P User Manual

DRAM Configuration

CPU Host Clock Control
x CPU Frequency (MHz)
Set Memory Clock
x Memory Clock
DCTs Mode
DDR3 Timing Items
x CAS# latency
x RAS to CAS R/W Delay
x Row Precharge Time
x Minimum RAS Active Time
x 1T/2T Command Timing
x TwTr Command Delay
x Trfc0 for DIMM1
x Trfc2 for DIMM2
x Trfc1 for DIMM3
x Trfc3 for DIMM4
x Write Recovery Time
x Precharge Time
: Move
Enter: Select
F5: Previous Values
x Row Cycle Time
x RAS to RAS Delay
: Move
Enter: Select
F5: Previous Values
CPU Host Clock Control, CPU Frequency (MHz), Set Memory Clock, Memory Clock
The settings under the four items above are synchronous to those under the same items in the
MB Intelligent Tweaker(M.I.T.).
DCTs Mode
Allows you to set memory control mode.
Ganged Sets memory control mode to single dual-channel.
Unganged Sets memory control mode to two single-channel.(default)
DDR3 Timing Items
Manual allows all DDR3 Timing items below to be configurable.
Options are: Auto (default), Manual.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
DRAM Configuration
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
DRAM Configuration
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Auto]
200
[Auto]
x5.33 1066Mhz
[Unganged]
[Auto] SPD Auto
Auto 7T 7T
Auto 7T 7T
Auto 7T 7T
Auto 20T 20T
Auto - - - -
Auto 4T 4T
Auto 110ns 110ns
Auto - - - -
Auto - - - -
Auto - - - -
Auto 8T 8T
Auto 3T 3T
F10: Save
Auto 27T 27T
Auto 4T 4T
F10: Save
- 39 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup