Brother MFC-J825DW Quick Setup Manual page 25

Wired Network
c
Carefully guide the network cable into the cable
channel and out the back of the machine.
Connect the cable to your network.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both the USB and the LAN cables are being
used, guide both cables through the cable
channel with one on top of the other.
d
Using both hands, grasp the plastic tabs on
both sides of the machine and gently close the
scanner cover.
18
Install MFL-Pro Suite
a
Put the supplied installer CD-ROM into your
CD-ROM drive.
b
Double-click the Start Here OSX icon to install.
c
Choose Wired Network Connection
(Ethernet), and then click Next. Follow the
on-screen instructions.
d
Please wait for the software to install, it will take
about 30 seconds. After the installation, the
Brother software will search for the Brother
device.
e
If the machine is configured for your network,
choose the machine from the list, and then click
OK.
Macintosh
25