Configuration Using The Brother Installer Application On The Installation Cd-Rom To Configure Your Wireless Network Machine - Brother MFC-J6510DW Network User's Manual

Configuring your machine for a wireless network
Configuration using the Brother installer application on the installation
CD-ROM to configure your wireless network machine
You can also use the Brother installer application on the installation CD-ROM we have provided with the
machine. You will be guided by the on-screen instructions until you are able to use your Brother wireless
network machine. You must know your wireless network settings before you proceed with this
installation.
Configuration using the Automatic Wireless mode
If your WLAN access point/router (A) supports either Wi-Fi Protected Setup (PBC
configure the machine easily without knowing your wireless network settings using the Brother installer
application.
1
Push Button Configuration
Configuration temporarily using a USB or network cable
You can temporarily use a USB cable or network cable when you configure your Brother machine in this
method. The USB and network cables are not standard accessories included with the machine.
 You can remotely configure the machine from the computer on the network using a USB cable (A)
1
You can configure the wireless settings of the machine using a USB cable temporarily connected to a wired or wireless computer.
1
) or AOSS™, you can
1
.
13
3
3
3
3