Sharp AR-M201 Operation Manual page 59

Program
Program name
number
19 AE LEVEL ADJUST
20 LANGUAGE
21 RESET FACTORY
SORT AUTO
22
SELECT
• CHECK OC
OPEN
• CHECK RSPF
24
OPEN (When an
RSPF is
installed.)
VALID COPY
25
WIDTH
28 LSU SETTING
29 PAPER TYPE
DISPLAY
30
CONTRAST
Setting codes
(factory default
setting appears
in bold)
• This is used to adjust the
1: SPF/RSPF
(Adjustment to • The automatic exposure level can
5 levels is
possible.)
2: DOCUMENT
• For the procedure for adjusting
GLASS
(Adjustment to
5 levels is
possible.)
1: AMERICAN
ENGLISH
• This is used to set the
2: ENGLISH
3: FRENCH
4: SPANISH
• This is used to return all settings
1: YES
2: NO
• Use this setting to enable or
1: ON
2: OFF
• You can set the operation that
1: ON
2: OFF
• Set the allowed paper sizes
1: A4 (8.5x11)
2: B5R (5.5x8.5)
• Select whether copying is only
1: ON
2: OFF
• Set the temperature of the
1: PLAIN PAPER
2: HEAVY PAPER
1: LIGHTER
2: LIGHT
• Set the contrast of the display.
3: NORMAL
4: DARK
5: DARKER
USER SETTINGS
Explanation
exposure level.
be adjusted separately for the
document glass and the RSPF.
the exposure and guidelines
for numeric values, see page
24. The factory default setting
for the exposure level is centre.
language used in the display.
to the factory default settings.
disable sort auto select mode.
takes place if the [START] key
( ) is pressed when the
original cover/RSPF is not
completely closed. (For
details on the "Check original
cover/RSPF open function",
see page 14.)
for copying from the bypass
tray. When "B5R (5.5x8.5)" is
selected, a copy of an A4
(letter) size original will only
be printed up to B5R (invoice)
size.
allowed when the polygon
motor is rotating, or also when
the polygon motor is stopped.
fusing unit when the bypass
tray is used.
7
57