Sharp AN-PR1500H Operation Manual page 30

Enjoying surround sound (sound mode) (continued)
AN-PR1500H
Preset sound mode
Select any of the 8 preset modes already set to the optimal sound quality levels.
Select a desired sound mode by pressing the SHIFT and SOUND MODE buttons
simultaneously.
Preset sound mode
STANDARD
CINEMA
NEWS
MUSIC
SPORT
NIGHT
BASS
TREBLE
Bass control
1. Press the SHIFT and SOUND MODE buttons simultaneously to select "BASS".
2. Within 10 seconds, press the VOLUME (+ or –) button to adjust the bass.
Treble control
1. Press the SHIFT and SOUND MODE buttons simultaneously to select "TREBLE".
2. Within 10 seconds, press the VOLUME (+ or –) button to adjust the treble.
30
Display
-5 +5
-5 +5
Dolby Virtual Speaker (DVS) sound mode
The Dolby Virtual Speaker (DVS) creates virtual surround sound comparable to the
5.1ch sound produced by the 2.1ch speaker.
When setting DVS to "ON" for 2 channel stereo signals, Dolby Pro Logic
31) brings out virtual sound effects through the signals converted into 5.1ch.
Press the DVS button.
The Dolby Virtual Speaker indicator lights up and set change to DVS WIDE mode.
Press DVS button again to change to DVS REFERENCE mode.
Press the DVS button again to return to "DVS OFF".
Notes:
The DVS default setting is "WIDE" mode.
When setting the DVS mode to "WIDE" or "REFERENCE", the preset sound
mode and Audistry (SOUND SPACE mode, MONO TO STEREO mode) are
cancelled. (The NATURAL BASS mode and the INTELLIGENT VOLUME mode
are not cancelled.)
Monaural signals do not generate surround effects.
In case input signal is Dual mono type and DVS is set to "WIDE" or
"REFERENCE", the sound may not be output correctly.
When unit is turned on for the first time, selecting BASS mode using the
SOUND MODE button will automatically set the DVS to OFF. Subsequently,
when BASS mode is selected again, the DVS setting will follow the current user
setting.
(see page