Table of Contents
Advertisement
NORMAL COPYING
Automatic two-sided copying from the reversing automatic
document feeder
When a duplex module/2 x 500 sheet paper drawer and a duplex bypass/inverter unit are installed, the following
automatic two-sided copy functions are possible. The copy paper is turned over automatically, allowing easy two-
sided copying.
NOTE
Certain restrictions exist depending on the amount of memory installed and the copy settings. (See "Copy mode
output restrictions" and "Guidelines for the number of scannable originals during sort copying" on page 5-4.)
Original
Place the originals in the document feeder
1
tray. (pages 4-6 to 4-9)
2
Touch the [2-SIDED COPY] key.
2-SIDED COPY
OUTPUT
Select the desired duplex copy mode.
3
READY TO COPY.
INTERRUPT
SIDED COPY
BINDING
CHANGE
unit are installed. The display will vary depending
on the equipment installed.
If a copy key is touched for a mode that cannot be
selected, a double beep will be sounded.
5-6
Copy
The left screen shows
OK
the
display
when
reversing
automatic
document
feeder,
duplex module/2 x 500
sheet paper drawer, and
a duplex bypass/inverter
The following two-sided modes can be selected
1. Automatic two-sided copying from one-sided
originals
2. Automatic two-sided copying from two-sided
originals
3. Automatic one-sided copying from two-sided
originals
G This function can be used even if a duplex module/2 x
500 sheet paper drawer and/or a duplex bypass/
inverter unit are not installed.
Example of a
portrait-oriented
original
The image to be copied onto the second side of 2-
sided copies can be inverted so that the resultant
2-sided copies are in the correct orientation for
binding at the top. For top binding, touch the
[BINDING CHANGE] key on the 2-sided copy
selection screen.
a
4
Touch the [OK] key.
a
BINDING
CHANGE
Make selections and proceed as in steps 6 to 9 on
pages 5-2 and 5-3.
Example of a
landscape-oriented
original
OK
Advertisement
Chapters
Table of Contents
Troubleshooting
