G Saddle Stitch Finisher Functions; Saddle Stitch Finisher Functions - Sharp AR-C262M Operation Manual

SADDLE STITCH FINISHER

Saddle stitch finisher functions

I I I I Sort mode
Sorted sets will be delivered.
I I I I Group mode
Groups of copies of the same page will be
delivered.
I I I I Offset mode
Offset mode
I I I I Staple sort mode
Collated sets of prints or copies will be stapled and delivered to the offset tray. When saddle stitching is selected,
the prints or copies will be stapled at the centre and delivered to the saddle stitch tray. The stapling positions,
orientation, paper size for stapling, and stapling capacity are shown below.
Stapling positions
Top left corner of
printouts
Lower left corner
of printouts
Centre left two
positions of
printouts
Saddle stitch on
centrefold line.
3-4
Non-offset mode
Portrait orientation
Available paper sizes:
A4, B5 and 8-1/2" x 11"
Stapling capacity:
For each size, up to 30 sheets
can be stapled
Same as above
Same as above
Paper in the portrait
direction cannot be saddle
stitched.
Original
Original
Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation.
(The offset function only operates in the offset
tray.)
Stapled sets will not be offset.
Landscape orientation
Available paper sizes: A3, B4,
A4R, 11" x 17", 8-1/2" x 14",
8-1/2" x 13" and 8-1/2" x 11"R
Stapling capacity: Up to 30
sheets of A4R or 8-1/2" x 11"R
paper can be stapled, up to 25
sheets of other paper sizes
Same as above
Same as above
Available paper sizes: A3, B4,
A4R, 11" x17" and 8-1/2" x 11"R
Stapling capacity: For each
size, up to 10 sheets can be
stapled
Printouts
Printouts