Table of Contents
Advertisement
E8
SETTING AND ADJUSTMENT (Continued)
Picture adjustment
!
Press
to call PICTURE screen.
PICTURE
@
Press
/
to select adjustment items.
CH
CH
#
Adjust using
/
.
• Wait for approximately three seconds to return to PICTURE menu.
$
Repeat steps 2 and 3 above to adjust other items.
%
Press
to return to normal screen.
PICTURE
The following table lists the adjustment items shown in the PICTURE menu and how they
change as you press
/
.
Selected item
Press
CONTRAST
-
To decrease contrast
COLOUR
-
For less colour intensity
BRIGHTNESS
-
For less brightness
TINT
To move tint toward red
SHARPNESS
-
For less sharpness
To more reddish
WHITE TEMP
background
*: TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV only)
• WHITE TEMP can only be adjusted on PICTURE menu.
• Pressing
while a PICTURE selection is displayed, only the selected mode is reset to the standard (factory-
NORMAL
setting) position.
• Pressing
while a PICTURE menu screen is displayed will reset all the item of PICTURE menu to the standard
NORMAL
(factory-setting) position.
PICTURE
CONTRAST
COLOUR
BRIGHTNESS
TINT
SHARPNESS
WHITE TEMP
CONTRAST
-
1
4
7
Press
+
To increase contrast
+
For more colour intensity
+
For more brightness
FEATURE
To move tint toward green
CH-SET
+
For more sharpness
To more bluish background
E9
TIMER SETTING
Off timer
50
0
Automatically turns power off after a set length of time has passed.
+10
-10
!
Press
TIMER
@
Press
CH
#
Press
50
+
off.
• Maximum time that can be preset is 12 hours and 50
minutes. Timer start to count down after setting.
$
Press
TIMER
• Five minutes before the preset length of time expires, the remaining time
TV/VIDEO
appears on the screen.
2
3
• A flashing display of the remaining time appears during the last few seconds.
5
6
CH
When the preset length of time has passed, the TV set enters the Standby
8
9
CH
0
mode.
CH
CH
On timer
TIMER
PICTURE
PICTURE
NORMAL
Automatically turns power on after a set length of time has passed.
NORMAL
!
TV
Press
TIMER
@
Press
CH
#
Press
on.
• Maximum time that can be preset is 12 hours and 50
minutes. Timer start to count down after setting.
$
Press
CH
%
Press
^
Repeat step 4 to 5 above to select and set the
"VOLUME".
&
Press
TIMER
*
Press
• Power indicator will flash to indicate On Timer is set.
• When the preset length of time setting has passed, the power turns on and a
picture appears on the screen.
• The ON TIMER speaker volume gradually increases from zero to preset
volume.
• The Off timer is cancelled if the power is turned off or set to the Standby mode using
on the TV set, or if the power is otherwise interrupted.
POWER
• The On Timer is cancelled if the power is turned off using
• If the TV set is turned on by the On Timer, then the TV set will be automatically turned off in two hours if no buttons
are pressed on the TV set or remote control.
to call TIMER screen.
/
to select "OFF
".
CH
/
to set time for TV to turn
to return to normal screen.
to call TIMER screen.
/
to select "ON
".
CH
/
to set time for TV to turn
/
to select "POSITION".
CH
/
to set the channel.
to return to normal screen.
to put TV set into Standby mode.
.
POWER
TIMER
OFF
--:--
ON
--:--
POSITION
VOLUME
OFF
0:05
--:--
OFF
0:04
TIMER
OFF
2:30
ON
--:--
OFF
0:03
POSITION
VOLUME
--:--
OFF
0:02
OFF
0:01
OFF
0:00
Flashing
TV/VIDEO
1
2
3
4
5
6
7
8
9
0
TIMER
CH
OFF
--:--
ON
8:00
CH
POSITION
--
CH
--
VOLUME
CH
--:--
FEATURE
TIMER
PICTURE
CH-SET
NORMAL
TIMER
TIMER
OFF
--:--
ON
8:00
TV
CH28
POSITION
VOLUME
--
--:--
TIMER
OFF
--:--
ON
8:00
CH28
POSITION
VOLUME
20
--:--
[ TV Set ]
Power indicator
(Flashing)
on the remote control or
Advertisement
Table of Contents
