Table of Contents
Advertisement
E2
ACCESSORIES
The following accessories are included with this television.
Remote Control
E3
ANTENNA CONNECTION
Connecting to an antenna
TV
300-ohm
75-ohm
twin-lead
impedance
flat feeder
converter
(not supplied)
(not supplied)
75-ohm
coaxial cable
(round cable)
(not supplied)
Standard DIN45325
plug (IEC 169-2)
Antenna in
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC 169-2),
plug it into the antenna jack at the rear of the set.
E4
CONNECTING TO OTHER EQUIPMENTS
Enjoy playback from a video disc player, VCR or other video equipment by connecting them to
this TV set using the Audio/Video in terminals.
Example of rear terminals usage
For Playback
TV
DVD Player
To Audio/Video
out terminals
To Audio/Video
out terminals
VCR
• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.
Operation manual
Size-AA batteries
Connecting to an antenna via a VCR
VCR
AV-1 IN
OUT
AUDIO
VIDEO
To antenna
in terminal
To RF out
terminal
If your outdoor antenna uses a 300-ohm twin-lead
flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
Yellow : To VIDEO
White : To AUDIO
For Recording and Editing
AV-1 IN
OUT
AUDIO
VIDEO
AV-1 IN
OUT
AUDIO
To Audio/Video
VIDEO
in terminals
E5
PART NAMES
TV set
POWER switch
Turns on and off the
Power can be turned on by the
remote control when the indicator
Receives the infrared wave from
VCR
POWER
main power.
Power indicator
is dimly lit.
Infrared sensor window
MENU/PRESET
MENU/PRESET button
the remote control.
Tunes the channels.
Used for MENU setup.
/
CH
CH
Channel up/down buttons
Selects the channels.
Tunes or sets the channels.
/
Volume up/down buttons
Adjusts the volume.
Makes adjustments in PRESET.
Advertisement
Table of Contents
