Sharp AR-BC320 Driver Installation page 4

INTRODUCTION
TWAIN driver
TWAIN is an interface standard for scanners and other image input devices. By installing the TWAIN driver, you can
scan using any application that supports the TWAIN standard.
I I I I How the TWAIN driver differs from the network scanner
The scanner function of the TWAIN driver differs from the scanner function of the optional network scanner
expansion kit as indicated below (for more information, see page 3 of the "Operation manual (for network
scanner)").
Using the network scanner function
Multiple originals can be scanned continuously.
Using the TWAIN driver (SHARP MFP TWAIN C)
Fine adjustments can be made to the image while viewing it on the computer.
Part of a scanned image can be cut out and saved on the computer.
Required part
I I I I Setup for scanning
Perform the following procedures to set up for scanning with the TWAIN driver.
Procedure
Installing the TWAIN driver ....................................................................... Page 19
Setting the IP address............................................................................... Page 21
Scanning with the TWAIN driver ............................................................... Page 22
• Place the original and switch the machine to PC SCAN mode
• Select the device
• Open the TWAIN driver
• Select scan settings
• Scan the original and save the image
2
Original
Page