Sharp AR-BC320 Driver Installation page 13

Installation method 2
Use this procedure to install the software in the following environments:
1. The printer is connected by USB cable or parallel cable.
2. Windows version: Windows XP/Server 2003
NOTE
To install this software, you must have administrator's rights.
Installing the software in Windows XP/Server 2003 (USB/parallel interface)
Install the software as follows.
Before starting the installation, make sure the USB or parallel interface cable is not connected to the machine.
Insert the "Software
1
accompanied the machine into your CD-
ROM drive.
2 Click the [start] button, select [My
Computer], and then double-click the CD-
ROM icon.
3 Double-click the [SETUP] icon.
The Licence Agreement window will
4
appear. Make sure that you understand
the contents of the licence agreement, and
then click the [Yes] button.
After confirming the message in the
5
"Welcome" window, click the [Next]
button.
6 Click the [Printer Driver] button.
To view detailed information on the software, click
the [Display Readme] button.
INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
CD-ROM" that Click the [Next] button.
7
8 Click the [Custom installation] button.
9 Click the [Connected to this computer]
and click the [Next] button.
10 When you are asked if you wish to install
the display font, select an answer and
click the [Next] button.
11