Function Parameters For And; Function Parameters For - Sharp XE-A301 Instruction Manual

A301_3(En) 03.4.24 7:40 PM

Function parameters for

*: Item:
A +/- sign
B Item % / Item
C Subtotal % / Subtotal
D Entry digit limit for discount key
When programming for percent keys, always enter 0 for D.
+/- sign
• Programming of the +/- sign assigns the premium or discount function for each key.
_ _
Item % / Item
• Percent/discount calculation for the individual department and PLU/subdepartment
Subtotal % / Subtotal
• Percent/discount calculation for the subtotals
Entry digit limit (For discount key only)
• The entry digit limit is in effect for the REG mode operations but can be overridden in the MGR mode. The
entry digit limit is represented by the number of allowable digit for the maximum entry amount for discount
key. When "0" is set, open price entry is prohibited.
Key operation example
Function parameters for
*: Item:
A Open rate entry
B Preset rate entry
C Position of decimal point (from right) (tab)
Key operation example
Page 33
% &
, and
To program "0" for all items
@
*ABCD
To program for another key
Selection:
+ (premium) sign
- (discount) sign*
_
Allow*
Disallow
_
Allow*
Disallow
_ _
@
1006
- A
V
To program "0" for all items
@
*ABC
Selection:
Allow*
Disallow
Allow*
Disallow
@
102
V A
-
% & A
or
-
Print
V A
Print
Entry:
0
1
0
1
0
1
0-8 (default:8)
From left, BCD
Sign(A)
Entry:
0
1
0
1
0-3 (default:2)
From left, ABC
33