Single Item Cash Sale (Sics) Entry; Displaying Subtotals; Finalization Of Transaction; Cash Or Cheque Tendering - Sharp XE-A301 Instruction Manual

A301_2(En) 03.4.24 7:37 PM
Key operation example
Department entry
PLU entry

Single item cash sale (SICS) entry

• This function is useful when a sale is for only one item and is for cash. This function is applicable only to those
departments that have been set for SICS or to their associated PLUs or subdepartments.
• The transaction is complete and the drawer opens as soon as you press the department key,
p
key.
Key operation example
For finishing
the transaction
If an entry to a department or PLU/subdepartment set for SICS follows the ones to departments or
PLUs/subdepartments not set for SICS, it does not finalize and results in a normal sale.
4

Displaying Subtotals

The subtotal is displayed by pressing the
been made is displayed with the function message "SUBTOTAL".
Subtotal will not be printed on a receipt on the current factory setting. If you want to print it, change
the setting by programming. Refer to "Receipt print format" (Job code 7) on page 45.
5

Finalization of Transaction

Cash or cheque tendering

s
Press the key to get a subtotal, enter the amount tendered by your customer, then press the
if it is a cash tender or press a cheque key (
greater than the amount of the sale, the register will show the change due amount with the function message
"CHANGE". Otherwise the register will show a deficit with the function message "DUE". You now must make a
correct tender entry.
16
Page 16
@ @
7 10
¶
600
@ @
8 12
p
35
A
250
ª
s
key. When you press it, the subtotal of all entries which have
X Y
or ) if it is a cheque tender. When the amount tendered is
Receipt print
When Australian printing format
is selected
Receipt print
d
key or
A
key