Sharp Notevision PG-C30XE Operation Manual page 25

Operating the Wireless Mouse from the Remote Control
Effective buttons in MOUSE mode
Remote control
(Front view)
Remote control
(Rear view)
LASER POINTER
BLACK SCREEN
MOUSE
RIGHT-CLICK
BACKLIGHT
LEFT-CLICK
Use as a Wireless Mouse
Be sure the supplied remote mouse receiver is
connected to your computer.
(Slide the MOUSE/ADJUSTMENT switch on
the remote control to the MOUSE position.)
• The wireless mouse may not operate correctly if your
computer serial port is not correctly set up. Refer to the
computer's operation manual for details of setting up/
installing the mouse driver.
• For one-button mouse systems, use either the LEFT-CLICK
or RIGHT-CLICK button.
Using the remote control in a dark room
Press BACKLIGHT, and the buttons will light up. Green
lights refer to mouse operations, and red lights to
projector adjustments.
Button name
Position of MOUSE/ADJUSTMENT switch
MOUSE
LASER POINTER/MENU
LASER POINTER (GREEN)
BLACK SCREEN (GREEN)
BLACK SCREEN/KEYSTONE
RIGHT-CLICK (GREEN)
RIGHT-CLICK/ENTER
MOUSE/ADJUSTMENT MOUSE (NOT LIT)
LEFT-CLICK ON (NOT LIT)
POWER ON/OFF
VOLUME /
MUTE
INPUT
UNDO
FREEZE
AUTO SYNC
ENLARGE
RESIZE
TOOLS
GAMMA
Use as a Laser Pointer
(Slide the MOUSE/ADJUSTMENT switch on
the remote control to the MOUSE position.)
Press LASER POINTER (
pointer. When the button is released, the light
automatically goes off.
• For safety, the laser pointer automatically goes off after 1
minute of continuous use. To turn it on, release LASER
POINTER ( ) and press again.
MOUSE ADJ.
ADJ.
MENU (RED)
KEYSTONE (RED)
ENTER (RED)
ADJUSTMENT (NOT LIT)
—
ON (RED)
MOUSE ADJ.
) to activate the laser
22