Skipping Channels - Sharp 14R2F Operation Manual

Skipping Channels

This function lets you skip vacant channels or channels that you never
watch when you select channels using the CHANNEL UP or DOWN button
1
4
7
#
!
FUNCTION
@,$
SYSTEM
(TV set)
• If a channel that has been set to SKIP is selected using the CHANNEL SELECT buttons on the remote
control, the " " mark will be displayed on the left of the channel number.
◊
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically
terminated and the TV set returns to normal mode.
1
4
!
7
#
FUNCTION
@,$
SYSTEM NORMAL
‰ 11
H Setting Skip
!
Use the remote control or TV set
TV/VIDEO
CHANNEL UP (CH
DOWN (CH
2 3
the channel to skip.
5 6
@
8 9
Press the FUNCTION button 2
0 times.
#
Press the VOLUME UP ( ) or
CH
DOWN ( ) button.
CH
The SKIP mode is set and the
" " mark is displayed on the left
◊
TIMER PICTURE
of the channel number.
NORMAL
$
Press the FUNCTION button 4
times. The on-screen display
disappears.
Example:
When pressing the CHANNEL
UP (CH
button, Channel 25 is skipped
as shown below.
Channel up: ...→ 23 → 24 → 26 →...
Channel down: ...→ 27 → 26 →24→...
!
H Cancelling Skip
!
Use the remote control
TV/VIDEO
SELECT
skipped channel.
2 3
5 6
@
Press the FUNCTION button 2
8 9
times.
0
#
Press the
DOWN ( )
CH
The "
CH
channel number disappears and
the SKIP mode is cancelled.
TIMER PICTURE
$
Press the FUNCTION button 4
times. The on-screen display
disappears.
TV
) or
∑
) button to select
≈
) or DOWN (CH
∑ ≈
CHANNEL
buttons to select the
VOLUME UP ( ) or
button.
" mark on the left of the
◊
SKIP mode mark
)
SKIP mode mark