Skipping Channels - Sharp 14D2-SS Operation Manual

Skipping Channels

This function lets you skip vacant channels or channels that you never
watch when you select channels using the CHANNEL UP or DOWN button
1
4
7
#
CH
CH
!
FUNCTION TIMER
@,$
SYSTEM NORMAL
(TV set)
• If a channel that has been set to SKIP is selected using the CHANNEL SELECT buttons on the remote control,
the "◊" mark will be displayed on the left of the channel number.
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated
and the TV set returns to normal mode.
1 2
!
4 5
7 8
0
CH
CH
#
FUNCTION TIMER
@,$
SYSTEM NORMAL
TV
‰ 11
H Setting Skip
! Use the remote control or TV
TV/VIDEO
set CHANNEL UP (CH
DOWN (CH
2 3
select the channel to skip.
5 6
8 9
@ Press the FUNCTION button 2
0
times.
# Press the VOLUME UP ( ) or
DOWN ( ) button.
The SKIP mode is set and the
"◊" mark is displayed on the
PICTURE
left of the channel number.
$ Press the FUNCTION button 4
times. The on-screen display
disappears.
Example:
When pressing the CHANNEL UP
(CH
Channel 25 is skipped as shown
below.
Channel up: ... → 23 → 24 → 26 → ...
Channel down: ... → 27 → 26 → 24 → ...
!
H Cancelling Skip
! Use the remote control
TV/VIDEO
CHANNEL SELECT buttons to
select the skipped channel.
3
6
@ Press the FUNCTION button 2
9
times.
# Press the VOLUME UP ( ) or
DOWN ( ) button.
The "◊" mark on the left of the
channel number disappears
and the SKIP mode is
PICTURE
cancelled.
$ Press the FUNCTION button 4
times. The on-screen display
disappears.
∑
) button to
≈
) or DOWN (CH ) button,
∑ ≈
S K I P
) or
S K I P
SKIP mode mark
SKIP mode mark
S K I P
S K I P
25
25
25
25
25
25