Solutions To Password Problems; Solutions When Network Alert E-Mails Are Not Received; Where To Get Help - Epson PowerLite 1750 User Manual

Remote Control Operation

Solutions to Password Problems

If you cannot enter or remember a password, try the following solutions:
• You may have turned on password protection without first setting a password. Try entering 0000 using
the remote control.
• If you have entered an incorrect password too many times and see a message displaying a request
code, write down the code and contact Epson.
• If you lose the remote control you cannot enter a password. Order a new one from Epson.
Parent topic:

Solutions When Network Alert E-Mails are Not Received

If you do not receive an e-mail alerting you to problems with a projector over the network (PowerLite
1760W/1770W/1775W), try the following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's network Mail menu
or in the network software.
• Set the Standby Mode to Communication On so the network software can monitor the projector in
standby mode.
Parent topic:
Related concepts
Wireless Network Projection
Related references
Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu

Where to Get Help

If you need to contact Epson for technical support services, use the following support options.
Solving Projector or Remote Control Operation Problems
Solving Problems
151