Epson PowerLite 1725 Operation Manual page 96

Troubleshooting
f E-mail is not sent even if an abnormality occurs in the projector
Check
Is the wireless LAN unit connected?
For Wireless LAN
Is the network connect setting correct?
Is "Standby Mode" set to "Network On"?
Did a fatal abnormality occur and the projector come
to a sudden stop?
Is power being supplied to the projector?
Is the network cable connected correctly?
For Wired LAN
Check that the supplied wireless LAN unit is securely connected.
Check the projector's network settings. See the projector User's Guide for more information.
To use the Mail Notification function when the projector is in standby, set "Network On" in "Standby Mode"
from the configuration menu. See the projector User's Guide for more information.
When the projector comes to a sudden stop, e-mai cannot be sent.
If, after checking the projector, the abnormal state continues, contact Epson as described in the projector
User's Guide.
Check that your electrical outlet or power source is functioning correctly.
Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected
properly.
Remedy
96