Using The Toolbar - Epson PowerLite 1725 Operation Manual

Connecting to a Projector on a Network and Projecting
Set options
You can make general setting options such as the processing method
when EMP NS Connection starts. For optional settings, see s
Connect
Connect to the projector you selected from the search results list. When a
connection is made with a projector, a toolbar is displayed.

Using the Toolbar

The toolbar is displayed on the computer screen after EMP NS
Connection starts and a connection is made with the projector. You can
use this toolbar to operate and make settings for the projector.
Select target projector
Click to select which projectors can be operated from the toolbar when
p.47 projecting from multiple projectors using the distribution function or
Multi-screen display. The indication below the icon shows that the
projector can be controlled.
"ALL" indicates that all of the connected projectors can be controlled.
Or when "1, 3" is displayed, projectors No. 1 and No. 3 can be
controlled.
Click
Select the projector to be controlled.
Stop
Stops projection while connected to the projector. A black screen is
projected while stopped. Audio does not stop. To stop the audio, or to
display a user-registered logo while projection is stopped, use the A/V
mute function.
Show
Releases stop or pause.
Pause
Pauses projected images while connecting to the projector. Audio does
not stop.
to display the following screen.
Indicates the number of an
allocated projector. This No.
indicates the number of the
projector displayed as an icon that
you can control from the toolbar.
20
Indicates the status of
the projector.
Stop
Show
Pause
Presentation
Mode
Movie Sending
Mode