Epson PowerLite 1725 Operation Manual page 95

Troubleshooting
f Cannot project with Quick Wireless Connection
Check
Is the wireless LAN unit connected?
For Wireless LAN
Is the projector turned on?
Is the projector information stored in the USB key?
Is the USB key for Quick Wireless Connection
connected to your computer?
Have you changed the projector settings after you
stored the projector information in the USB key?
f Trouble with the USB key for Quick Wireless Connection
Check
While projector information was being stored in the
USB key, was there any message, saving or finished,
displayed on the screen?
Check that the supplied wireless LAN unit is securely connected.
Turn on your projector. s p.7
First store the projector information in the USB key, then connect the USB key to your computer. s
Connect the USB key to the computer. If the USB key is already connected, disconnect once and then
reconnect it.
If projection fails even then, the information stored in the USB key may have been erased. Access the Epson
website for recovery. Go to http://www.epson.com
site.
Store the projector information again in the USB key.
Then connect the USB key to the computer.
If any message was not displayed, the stored information in the USB key may have been erased. Access the
Epson website for recovery. Go to http://www.epson.com
Web site.
Remedy
and select the support section of your local Epson Web
Remedy
and select the support section of your local Epson
95
p.7