Choosing A Startup Image - Rollei RCP-8325 User Manual

Choosing a Startup Image

1
Turn the power on, and set the camera to the PLAYBACK mode
( page 13).
2
Open the menu.
Press the MENU button, then use the four-way control to select S.Image
) and press the SET button.
(
3
Press or
apply the choice.
A message "Completed" appears.
4
Set the camera to the Setup Menu (
5
Press or
( ) then press
button.
6
Press or
option and press the SET button to
apply the setting.
[Off]:
[System]:
[My image]: Use the image that you just specified in step 3.
7
Press the MENU button to close the menu.
C a u t i o n
C a u t i o n
The start-up image will not be deleted even if the original image is deleted or
memory formatted.
to select the image you want, then press the SET button to
to select S.Image
or the SET
to select a desired
Disable the start-up image.
Use camera default image.
43
page 16).