Choosing A Startup Image - Rollei RCP-8325 User Manual

Choosing a Startup Image

1
2
3
4
5
6
7
C a
C a
Downloaded from www.Manualslib.com
Turn the power on, and set the camera to the PLAYBACK mode
( page 13).
Open the menu.
Press the MENU button, then use the four-way control to select S.Image
) and press the SET button.
(
Press or to select the image you want, then press the SET button to
apply the choice.
A message "Completed" appears.
Set the camera to the Setup Menu (
Press or to select S.Image
( ) then press
button.
Press or to select a desired
option and press the SET button to
apply the setting.
[Off]:
Disable the start-up image.
[System]:
Use camera default image.
[My image]: Use the image that you just specified in step 3.
Press the MENU button to close the menu.
u t i o n
u t i o n
The start-up image will not be deleted even if the original image is deleted or
memory formatted.
manuals search engine
page 16).
or the SET
43