Setting Drive Mode - Rollei RCP-10325X User Manual

Setting Drive Mode

WhenyouselectDRIVEMODEinthecapturemenu,youcanchoosefrom
threeshootingmodes:Single,ContinuousandBurstmodes.
Note 1: The flash mode and self-timer is "Off" when using
"CONTINUOUS" and "BURST".
Note 2: The CONTINUOUS mode will stopped when the SD card or the
internal memory is full. A "CARD FULL" warning appears on the
LCD .
Setting
SINGLE
CONTINUOUS
BURST
1
 InCapturemenu,select"DRIVE
   MODE".
2
 Select"SINGLE","CONTINUOUS"or
   "BURST".

Press OK button to confirm the setting.
Takes a single image. Press the shutter release
buttononcetocapturetheimage.
Takesaseriesofimageswhenyoupressdown
andholdtheshutterreleasebutton.Thecamera
willcontinuetotakeimagesuntilyoureleasethe
shutterreleasebutton.Whenselected,theicon
appearsontheLCDmonitor.
Takes5imageswhenyoupressdownthe
shutterreleasebuttononce.Whenselected,the
icon appearsontheLCDmonitor.
Function