Installation - Ricoh Caplio 300G Operation Manual

Installation

For Mac OS 8.6 to 9.2.2
If RCD-iMounter 6.0 was previously installed,
remove files in the following manner.
• Delete files that start with RDC that are in the Control
Panel folder.
• Delete files that start with RDC that are in the Function
Extensions folder.
• Delete files that start with RDC that are in the Initial
Settings Folder.
Turn on your Macintosh.
Insert the attached CD-ROM in the CD-ROM
drive.
The CD-ROM icon is displayed on the desktop.
Double-click the CD-ROM icon, and open the
[MacOS9] folder.
The [Caplio 300G Installer] icon appears.
Double-click the Installer [Caplio 300G
Installer] icon.
The Installer starts up and the Start screen appears.
Click [Caplio 300G Software].
Click the [OK] button.
The Installation screen appears.
Chapter 2 / Section 2 Downloading Images to a Computer (For Macintosh)
When you start your Macintosh, RICOH Gate L
also starts at the same time.
128
Click [Install].
Click [Continue].
The software is installed and then the Installation
Complete message appears.
Click the [Restart] button.
Your Macintosh restarts.