Advertisement
2. Important notes
These instructions will guide you through the process of installing the RDC-1 through RDC-300Z series USB
driver and utility software on your Windows XP computer. Be sure to read, understand, and observe all
precautions and requirements prior to attempting these procedures. If you feel you need assistance, please
contact our customer support network at the URL listed in the Customer support section below.
• Operating System: Windows XP (operation not guaranteed with other operating systems)
• Memory: 128MB or more (256MB or more is recommended)
• Connection cable: Use the dedicated cable included in the package
• Retrofit USB ports added by using an expansion feature (such as PCI bus) cannot be supported.
• Driver may fail to operate correctly when used with a USB hub or other USB devices.
3. Customer support
The following URLs may be useful if you need support during the installation process.
Download Windows XP-compatible software
http://www.ricoh.co.jp/r_dc/dc/notices/xp-dl.html
Contact Ricoh's customer support team
http://www.ricoh.co.jp/r_dc/dc/support/inquiry.html
4. Installing the utility software
Note: The authority to install this software to Windows XP is limited to users with administrator accounts.
Users who cannot log on as administrators will not be able to install this software.
I. Prior to installation
(1) Download the latest RDC-1 through RDC-300Z series software at the URL above. Be sure to note the
location where you save the downloaded files. You will need that information during the installation. Also,
be sure to save the downloaded files to your computer's hard drive.
(2) Save any important data you may be using and then quit all running applications.
(3) Disconnect any other USB or Plug & Play devices.
II. Installation procedure
Before connecting the RDC-1 through RDC-300Z series to your computer
(1) Browse to the folder where you saved the downloaded files.
(2) Click on the setup.exe icon to start the installation process.
(3) Click Next at the Welcome screen.
(4) Click Next at the Choose Destination Location window to
accept the default location or Browse to select a different
location. (See Figure 1.)
(5) Click Next to proceed past the Information screen.
4 - RDC-1 through RDC-300Z series Windows XP Installation Guide
Figure 1: Choose Destination Location
Advertisement
